STEP 3

Step 3/2W10 Ø 110 mm 5/8"
Compare

WORKABLE MATERIALS: Concrete / agglomerates, Granite / Sandstone, Marble / Limestone

Step 3/2W10 is a tool with a diameter of 110mm made of 3 20-bits rollers, for bushammering of antiskids on steps of concrete, agglomerates and stone. The rollers can be adjusted to different working diameters to allow the execution of antiskids in widths between 4 and 12 cm. Step 3/2W10 may be used also to work on steps already laid.

Achievable finishes:

Medium bushammering
Fine bushammering
Bushammered antiskid

Rotation speed:

Max 4.000 RPM

Tool diameter:

ø 110 mm

Mass:

1.3Kg

Width of antiskid:

from 4 to 12 cm

Technical documents:

Tool sheet IT-EN

Application:

Step 3/2W10 can be fixed on any angle grinder with variable RPM or with maximum 4.000 RMP. Attach the universal protection to the grinder| then screw in the tool like a normal sanding disc and let it work laid on the surface. M14 or 5/8" attachments are available| depending on the grinder on which they are mounted.

    Strengths:

    Easy installation and use on every kind of mini grinder It has advantages coming from the system of the glide Opportunity to work on thin or defective slabs Wide range of antiskids widths and finishes Opportunity to work on 4 cm edge

    Contact us

    For any further information about Step 3/2W10 Ø 110 mm 5/8" or our tools, where to find them and our services, including support, please contact us at any time by filling in this form and sending it to us

      This site is protected by reCAPTCHA and the Google Privacy privacy and Terms of Service apply.